Enhanced/Dual Powered
Willem EPROM Programmer
User Guide Â
Â
Â
Main Board / Cables
Main Board PCB3.5
Â
Main Board PCB4E
Â
Main Board PCB5.0
Â
Main Board PCB5.5C
Â
|
Parallel Data Cable (Printer extension cable, with male-female 25 pin connector, and pin to pin through) |
A-A type USB cable(for power) |
|
|
|
                               Â
         Â
Optional Items:
|
ATMELÂ 89 Adapter |
ATMEL PLCC 44 Adapter |
TSOP 48 Adapter |
|
|
|
|
|
FWH/HUB PLCC32Adapter |
PLCC32 Adapter |
SOIC Adapter(Simplified) |
|
On-Board |
On-Board |
|
|
AC or DC Power Adapter (9V or 12V, 200mA) |
SOIC Adapter(Professional) |
 |
|
|
|
 |
Â
While sites like GTA Mod Mafia provide video tutorials and links, always be cautious. Use a reliable antivirus to scan .exe or .zip files before opening them, as third-party modding sites can occasionally host insecure files.
The "Speed Meter Mod" for Grand Theft Auto: San Andreas (PC) is a popular modification that adds a visual speedometer to the game's user interface, which is not present in the original game. While sites like GTA Mod Mafia provide video
: Often includes damage indicators that change color (e.g., yellow during the day, green at night) and fuel gauges in more advanced versions. : Often includes damage indicators that change color (e
: Many versions allow you to toggle between kilometers per hour (km/h) and miles per hour (mph). How to Install : Most PC mods require you to copy a
: Displays the current speed of any vehicle, including cars, bikes, boats, and aircraft.
: Most PC mods require you to copy a .cs (CLEO script) or .asi file into your main GTA San Andreas directory or the CLEO folder.
Â
Hardware Installation & Configuration
|
Installation Steps
         (Note: the LPT port of PC MUST set to ECP or ECP+EPP during BIOS setup. To enter the BIOS setting mode, you need press "Del" key or "F1" key during the computer selftest, which is the moment of computer just power up.)  Software Version To Use | |||
| |||
|
 | |||
|
         The software interface:  | |||
|
| |||
|
 Hardware
Check  | |||
|
 PCB3.5/PCB4E
 PCB5.0
 PCB5.5C Â
Note: the Vcc setting jumper only has effect when you are using AC adaptor as power source. For the USB power only 5V Vcc is available. For the PCB5.5C, set DIP steps: 1. press DIP Set button twice to check current DIP bit position. Then set it again for ON or OFF. 2. press DIP Bit shift button to shift the DIP bit position to where need to set. And then press DIP Set button twice to check current DIP bit position. Then set it again for ON or OFF. 3. Repeat those steps till all DIP bit ae set same as software indicated. For PCB5.5C voltage and Special chip selection: 1. Put back the safety jumper. 2. Press the voltage button and hold for 1 second, the voltage LED should move to next. Repeat till desired voltage LED light up. 3. Press the chip selection button and hold for 1 second, the chip LED should move to next. Repeat till desired LED light up. 4. Remove the safety jumper to lock the selected voltage and chip selection  DIP Switch (PCB3.5, PCB5.0)
When programming one chip, follow the program prompt to set DIP switch .  |
Â
While sites like GTA Mod Mafia provide video tutorials and links, always be cautious. Use a reliable antivirus to scan .exe or .zip files before opening them, as third-party modding sites can occasionally host insecure files.
The "Speed Meter Mod" for Grand Theft Auto: San Andreas (PC) is a popular modification that adds a visual speedometer to the game's user interface, which is not present in the original game.
: Often includes damage indicators that change color (e.g., yellow during the day, green at night) and fuel gauges in more advanced versions.
: Many versions allow you to toggle between kilometers per hour (km/h) and miles per hour (mph). How to Install
: Displays the current speed of any vehicle, including cars, bikes, boats, and aircraft.
: Most PC mods require you to copy a .cs (CLEO script) or .asi file into your main GTA San Andreas directory or the CLEO folder.
 
Â