features a built-in web server. Once configured, you can access a custom control panel by typing the PLC's IP address into a web browser.
Your PC’s IP address must be in the same range (e.g., 192.168.1.10 ) for the initial setup. If your router uses 192.168.0.x , you must temporarily change your PC's IP to the .1.x range to access the PLC's configuration page and update its address. 3. Basic Programming (i-TRiLOGI) Once the software is running and the hardware is connected:
Use the software’s drag-and-drop interface to create ladder diagrams.
Click "Transfer" > "To PLC" to upload your code. You will need to enter the PLC’s IP address and potentially a password (default is usually blank or 8888 ). 4. Advanced Features Web Control: The