How To Fit A Log Burner ❲99% NEWEST❳

While you can prepare the hearth and fireplace area, the or signed off by your local building control office. 1. Planning and Prep

Lay a non-combustible hearth (slate, concrete, stone). It must be at least 12mm thick, extending 300mm in front and 150mm to each side of the burner.

I can also provide a detailed breakdown of the necessary for your specific setup. How To Have a Log Burner Without a Chimney | Stoves Are Us how to fit a log burner

Keep at least 150mm–400mm of clearance between the stove and any combustible materials (walls, furniture, wooden beams).

If using an old chimney, it must be cleared and checked for damage. A flexible stainless-steel liner is usually necessary for safe venting. While you can prepare the hearth and fireplace

A carbon monoxide alarm must be installed in the same room as the stove. 4. Commissioning

Place the log burner on the hearth, ensuring it is level. It must be at least 12mm thick, extending

Ensure compliance with Part J of the Building Regulations .