Before flashing any firmware via USB, ensure the jumper on your board is set to the correct voltage for your screen (usually 3.3V, 5V, or 12V) to avoid permanent damage.

Download all parts of the .rar file and extract them to get the .bin file (often named ZJV56.bin or similar). Format: Use a USB flash drive formatted to FAT32 .

Because "USB part1 .rar" suggests a multi-part archive, you generally need (Part 1, Part 2, etc.) in the same folder to extract the files successfully. Important Precautions

Power on the board. The indicator light should blink rapidly (red/green). Wait until the blinking stops or stays a solid color. Unplug the USB and restart the board.

Confirm the firmware is specifically for the 1920x1080 resolution. Installing the wrong resolution can lead to a black screen or a garbled display. General Installation Steps

Black Sale

30% Off Everything with code: black2025

Sale Ends

Days
Hours
Minutes
Seconds

New Live Pack Out!

Features 28 powerful mid/side audio effect racks for Ableton Live 12.2, each with 10 variations. From precise control in mixing to instantly giving more interest to basic sounds.

Sonic Bloom Mid/Side Racks Live Pack