Dip 34a Shemy Podkljuchenija -

To help you further, would you like the for a specific model (like the 03 vs the 04 with an isolator) or details on how to program the address ?

You must strictly observe the "+" and "–" polarity of the loop when connecting to the detector's base. Terminals:

💡 After physical connection, you must assign a unique address (1–127) to each detector using the UProg software or a programming command from the S2000M console. dip 34a shemy podkljuchenija

The detector is connected via a (DPLS) to a controller, such as the S2000-KDL or S2000-KDL-2I.

Typically used for the negative (–) line of the DPLS. To help you further, would you like the

Can be used to connect the cable shield (screen) if required. Key Specifications Power Supply: 8V to 11V provided directly through the loop. Current Consumption: Maximum 0.5 mA in standby.

Typically used for the positive (+) line of the DPLS. The detector is connected via a (DPLS) to

Usually ceiling-mounted with a standard mounting base; specific kits (MK-1, MK-2) are available for suspended ceilings.