Bumper bracket repair kit (Part #51117324343) for sensor holders [1.3].
The filename is associated with a detailed DIY guide for retrofitting Front Park Distance Control (PDC) on BMW F30 (3 Series) vehicles. This specific image likely showcases the front PDC retrofit installation kit or the wiring components required for the upgrade [1.3]. BMW Front PDC Retrofit Guide Summary
: After physical installation, the vehicle usually requires VO (Vehicle Order) coding to recognize the new front sensors [1.4]. 1669-set-1x.jpg
For the full step-by-step walkthrough and specific wiring diagrams, you can refer to the Front Park Distance Control Retrofit DIY on the Bimmerpost forums .
: Carefully drill 18mm holes in the front bumper at the marked positions (VLA, VLI, VRI, VRA) for the sensors [1.1]. Bumper bracket repair kit (Part #51117324343) for sensor
: Route the retrofit wiring harness from the front bumper through the firewall to the interior control modules [1.2, 1.4].
Based on community documentation from Bimmerpost , here is a high-level guide for using this kit: : Front bumper cable set (Part #61129260019) [1.3]. BMW Front PDC Retrofit Guide Summary : After
: Replace the button unit in the center console. Use a tool to press the plastic springs to release the old unit and connect the new control cable [1.2].